Understanding DHCP- Configuring DHCP and IPAM

Blog

,

Review Questions- Configuring DHCP and IPAM

  1. You are the network administrator for a midsized computer company. You have a single Active Directory forest, and you have a requirement to implement DHCP for the organization. You need to ensure that your DHCP deployment configuration is both fault- tolerant and redundant. Out of the options provided, which is the most reliable DHCP configuration that you could implement?
    A. DHCP split scope
    B. DHCP multicast scope
    C. DHCP failover
    D. DHCP super scope
  2. You are the network administrator for your organization. You need to configure the settings of an existing IPv4 scope. What PowerShell cmdlet would you use?
    A. Set- DhcpServerScope
    B. Set- Serverv4Scope
    C. Set- DhcpServerv4Scope
    D. Set- DhcpScope
  3. You have decided to split the DHCP scope between two DHCP servers. What is the recommended split that Microsoft states that you should use?
    A. 50/50
    B. 60/40
    C. 70/30
    D. 80/20
  4. You are the network administrator for an organization with two servers. The servers are named Server1 and Server2. Server2 is a DHCP server. You want Server1 to help lease addresses for Server2. You add the DHCP role to Server1. What should you do next?
    A. In the DHCP console, run the Configure Failover wizard.
    B. In the DHCP console, run the Configure Zone Wizard.
    C. On Server2, set the DHCP role to enabled.
    D. On Server1, start the Share Zone Information Wizard.
  5. True or False: You can load DHCP on a Nano server.
    A. True
    B. False
  6. You are the network administrator for a large training company. You have been asked to set up the default gateway setting using DHCP. Which option would you configure?
    A. 003 Router
    B. 006 DNS
    C. 015 DNS Domain Name
    D. 028 Broadcast Address
  7. You are the network administrator for your organization. Your DHCP server (Server1) has a scope of 10.10.16.0 to 10.10.16.254 with a subnet mask of /20. You need to ensure that all of the client computers obtain an IP address from Server1. What PowerShell cmdlet would you use?
    A. Reconcile- DHCPServerv4IPRecord
    B. Get- Serverv4Scope
    C. Get- DHCPServerv4IPRecord
    D. Set- DhcpServerv4Scope
  8. You are the network administrator for a large training company. You have been asked to set up the DNS setting of all you clients using DHCP. Which option would you configure?
    A. 003 Router
    B. 006 DNS
    C. 015 DNS Domain Name
    D. 028 Broadcast Address
  9. Your network contains two servers named ServerA and ServerB that run Windows Server 2022. ServerA is a DHCP server that is configured to have a scope named Scope1. ServerB is configured to obtain an IP address automatically. In the scope on ServerA, you create a reservation named ServerB_Reservation for ServerB. A technician replaces the network adapter on ServerB. You need to make sure that ServerB can obtain the same IP address as it did before the network card got replaced. What should you modify on Server1?
    A. The Advanced settings of ServerB_Reservation
    B. The MAC address of ServerB_Reservation
    C. The Network Access Protection settings of Scope1
    D. The Name Protection settings of Scope1
  10. You are the network administrator for a large training company. You have one DHCP server called DHCP1. DHCP1 has an IPv4 scope named Scope1. Users report that when they boot up their systems, it takes a long time to access the network. After auditing your network, you notice that it takes a long time for computers to receive their IP addresses from DHCP because the DHCP server sends out five pings before issuing the IP address to the client machine. How do you reduce the amount of time it takes for computers to receive their IP addresses?
    A. Run the DHCP Configuration Wizard.
    B. Create a new IPv4 filter.
    C. Modify the Conflict Detection Attempts setting.
    D. Modify the Ethernet properties of DHCP1.
  11. You are the network administrator for your company. You need to use a PowerShell command to configure an IP address block in IPAM. What command do you use?
    A. Set- IpamIP
    B. Set- IpamBlock
    C. Set- IPBlock
    D. Set- IPAddressBlock
  12. You are the network administrator for your company. You need to use a PowerShell command to add an IP address range to an IPAM server. What command do you use?
    A. Get- IpRange
    B. Set- IpRange
    C. Add- IpamRange
    D. Set- IPBlock
  13. You are the administrator for StormWind Studios online training company. You need to change the IPAM discovery configuration. What PowerShell command do you use?
    A. Get- IpamDiscovery
    B. Get- IpamDiscoveryDomain
    C. Set- IpamDiscovery
    D. Set- IpamDiscoveryDomain
  14. You are the network administrator for a large training company. You need to view the DNS zone information from the IPAM database. What PowerShell command do you use?
    A. Get- IpamDnsZone
    B. Add- IpamDnsZone
    C. Set- IpamDnsZone
    D. View- IpamDnsZone
  15. You are the administrator for StormWind Studios. You are installing and configuring IPAM. You have already installed IPAM and now you need to set up the GPOs for IPAM provisioning. What PowerShell command creates the provisioned GPOs needed for IPAM to function properly?
    A. Get- IpamGpoProvisioning
    B. Add- IpamGpoProvisioning
    C. Invoke- IpamGpoProvisioning
    D. Set- IpamGpoProvisioning
  16. You are the infrastructure team lead for a high- tech hardware development company. You need to delegate some of the team’s IPAM administration responsibilities between team members. You decide that Noelle will be managing IPAM address spaces, but she will not be managing IP address tracking and auditing. Which IPAM security group would best fit Noelle’s new responsibilities?
    A. IPAM Administrators
    B. IPAM Users
    C. IPAM ASM Administrators
    D. IPAM MSM Administrators
  17. You are the network administrator for a large communications company. You have recently decided to implement IPAM within your organization with the release of Windows Server 2022. You want to set up your IPAM infrastructure so that one primary server can manage your entire enterprise. Which IPAM deployment method would fulfill this requirement?
    A. Isolated
    B. Centralized
    C. Hybrid
    D. Distributed
  18. You are the network administrator for your organization. You need to view the DNS server information from the IPAM database. What PowerShell command would you use?
    A. View- IpamDnsServer
    B. Get- IpamDnsServer
    C. View- DnsServer
    D. Get- DnsServer
  19. You are the lead network administrator for a web hosting company. You have recently made the decision to implement IPAM within your organization. You have already installed and provisioned the IPAM feature on your dedicated Windows Server 2022 server. What is the next logical step in your IPAM deployment?
    A. Create a new IP block.
    B. Delegate IPAM administration.
    C. Configure server discovery.
    D. Create a new IP range.
  20. You are a systems administrator for the Stellacon Corporation. Because of the unusual growth of TCP/IP devices on your corporate network over the last year, you need to scale out your IPAM database capabilities. You are currently using a Windows Internal Database (WID) for your IPAM infrastructure, and you want to migrate your IPAM database to a Microsoft SQL Server. Which PowerShell cmdlet would you use to verify current IPAM database configuration settings?
    A. Move- IpamDatabase
    B. Show- IpamDatabaseConfig
    C. Show- IpamStatistics
    D. Get- IpamMigrationSettings

Leave a Reply

Your email address will not be published. Required fields are marked *